Surface detail reproduction and dimensional accuracy of molds: influence of disinfectant solutions and elastomeric impression materials / Reprodução de detalhes da superfície e estabilidadedimensional de moldes: influência das soluçõesdesinfetantes e elastômeros

This study compared the surface detail reproduction anddimensional accuracy of molds after disinfection using 2% sodium hypochlorite, 2% chlorhexidine digluconate or 0.2% peracetic acid to those of molds that were not disinfected, forfour elastomeric impression materials: polysulfide (Light Bodied Permlastic), polyether (Impregum Soft), polydimethylsiloxane(Oranwash L) and polyvinylsiloxane (Aquasil Ultra LV). Themolds were prepared on a matrix by applying pressure, using aperforated metal tray. The molds were removed followingpolymerization and either disinfected (by soaking in one of thesolutions for 15 minutes) or not disinfected. The samples werethus divided into 16 groups (n=5). Surface detail reproductionand dimensional accuracy were evaluated using opticalmicroscopy to assess the 20 ­µm line over its entire 25 mm length. The dimensional accuracy results (%) were subjectedto analysis of variance (ANOVA) and the means were comparedby Tukey’s test (α=5%). The 20 ­µm line was completelyreproduced by all elastomeric impression materials, regardlessof disinfection procedure. There was no significant difference between the control group and molds disinfected with peraceticacid for the elastomeric materials Impregum Soft (polyether)and Aquasil Ultra LV (polyvinylsiloxane). The high­leveldisinfectant peracetic acid would be the choice material for disinfection.

Este estudo comparou a reprodução de detalhes da superfície e estabilidade dimensional de moldes obtidos após desinfecção utilizando hipoclorito de sódio 2%, digluconato de clorexidina 2%, ou ácido peracético 0,2% a moldes que não foram desinfetados com quatro elastômeros: polissulfeto (Light Bodied Permlastic), polieter (Impregum Soft), silicona reação porcondensação (Oranwash L) e silicona reação por adição (Aquasil Ultra LV). Os moldes foram preparados sobre matriz conten dolinhas de 20, 50 e 75 µm realizado sob pressão com moldeirade metal perfurada. Os moldes foram removidos após a polimerização e desinfetados (utilizando uma das soluções porimersão, armazenados em frascos fechados durante 15 minutos)ou não desinfetados. Assim, as amostras foram divididas em 16grupos (n=5). A reprodução detalhes da superfície e a precisão dimensional foram avaliadas usando microscopia óptica na linha 20 µm com 25 mm de comprimento, de acordo com a norma ISO 4823. Os resultados de precisão dimensional (%) foram submetidos à análise de variância (A NOVA) e as médias comparadas pelo teste de Tukey com 5% de nível de significância. A linha de 20 µm foi completamente reproduzida por todos os elastômeros, independentemente do processo de desinfecção. Não houve diferença estatisticamente significativa entre o grupo controle e moldes desinfetados com acido peracético para os elastômeros Impregum Soft (polieter) e Aquasil Ultra LV (siliconareação por adição). O desinfetante de alto nível ácido peracético seria o material de escolha para a desinfecção.

Inclusion/exclusion criteria in placebo-controlled studies of vortioxetine: Comparison to other antidepressants and implications for product labeling.

BACKGROUND: We recently conducted a comprehensive review of the psychiatric inclusion/exclusion criteria used in 170 placebo-controlled antidepressant efficacy trials (AETs) published during the past 20 years and found that the criteria of more recent studies were significantly more restrictive than prior studies. Vortioxetine is the most recently approved medication for the treatment of major depressive disorder (MDD). We compared the inclusion/exclusion criteria of the vortioxetine studies to the criteria used in other AETs, and discuss the broader issue of the generalizability of AETs and the implications this might have for the labeling of antidepressants receiving FDA approval. METHODS: We conducted a comprehensive literature review of placebo-controlled AETs published from January, 1995 through December, 2014. We identified 170 AETs published during this 20 year period and compared the inclusion/exclusion criteria used in the 12 studies of vortioxetine to those used in the nonvortioxetine studies. A second analysis compared vortioxetine to the 3 antidepressants most recently approved prior to vortioxetine (desvenlafaxine, levomilnacipran extended release, vilazodone). RESULTS: Compared to the nonvortioxetine AETs, the vortioxetine studies significantly more often excluded patients with any comorbid Axis I disorder (p<.001) and more often required the current depressive episode to be longer than the DSM minimum symptom duration requirement of 2 weeks (p<.01). The cutoff on the Montgomery Asberg Depression Rating Scale required for inclusion in the vortioxetine studies was higher than the cutoff used in the other AETs (p<.01). LIMITATIONS: A limitation of the present analysis is that it was based on published placebo-controlled studies of antidepressants. CONCLUSION: The inclusion/exclusion criteria in the studies of vortioxetine were more restrictive than the criteria used in other AETs. Inconsistent with FDA guidelines on the labeling of medications, the label of vortioxetine does not include a description of the limits to the group of patients with MDD for whom the medication has been shown to be effective.

Headspace volatile composition of the flowers of Caralluma europaea N.E.Br. (Apocynaceae).

The volatile constituents of the flowers of Caralluma europaea (Guss.) N.E.Br (Apocynaceae) from Lampedusa Island were analyzed by a headspace GC method. The analyses allowed the identification and quantification of 41 compounds. The main components were, among the monoterpenoids, terpinolene (23.3%), alpha-terpinene (19.1%) and linalool (18.4%), whereas, among the carbonylic compounds the major constituents were heptanal (2.0%), octanoic acid (2.4%) and hexanoic acid (1.7%). The presence of a nitrogen containing compound, indole (0.8%) and of a sulphur containing compound, dimethylsulphide (t), noteworthy. The compounds found in the flowers of C. europaea have been compared with data available in the literature as regard to their odor, presence in other sapromyiophilous taxa, possible role as semiochemicals, and presence in decaying organic matter. 89.3% of total constituents have been described in other sapromyiophilous taxa. Some of the compounds are present in several types of decaying organic matter (excrements, decomposing bodies, and spoiled fish, etc). Several volatiles found in C. europaea flowers are used as semiochemicals by Hymenoptera, Coleoptera, Diptera, Lepidoptera and other insects. Sixteen volatiles, accounting for 32.4% of the total constituents, are described as attractants of some Diptera families, with a biology linked to decaying organic matter. Our data thus confirm that C. europaea floral bouquet falls within the sapromyiophilous pollination syndrome.

Ingrown toenail relief drug products for over-the-counter human use. Final rule.

The Food and Drug Administration (FDA) is issuing a final rule establishing conditions under which over-the-counter (OTC) ingrown toenail relief drug products containing sodium sulfide 1 percent in a gel vehicle are generally recognized as safe and effective and not misbranded. This rule also amends the regulation that lists nonmonograph active ingredients in OTC drug products for ingrown toenail relief by removing sodium sulfide from that list. This final rule is part of FDA's ongoing review of OTC drug products.

Growth of sulfate-reducing bacteria and methanogenic archaea with methylated sulfur compounds: a commentary on the thermodynamic aspects.

Methylated sulfur compounds such as dimethylsulfoniopropionate, dimethylsulfide, methanethiol, and other methylated sulfur compounds can act as sources of carbon and energy for the growth under anoxic conditions of a number of sulfate-reducing bacteria and methanogenic archaea. We summarise the range of degradative reactions that do or might occur in such organisms, and present thermodynamic data for these processes. These data enable estimates of the feasibility of the reactions as growth-supporting systems, and of the possible maximum growth yields of the bacteria and archaea catalysing them. We compare our new estimates with the few data that are currently available from the literature, and show that some published growth-yield assessments need reevaluation.

Discrimination among iron sulfide species formed in microbial cultures.

A quantitative method for the study of iron sulfides precipitated in liquid cultures of bacteria is described. This method can be used to quantify and discriminate among amorphous iron sulfide (FeS(amorph)), iron monosulfide minerals such as mackinawite or greigite (FeS(min)), and iron disulfide minerals such as pyrite or marcasite (FeS(2min)) formed in liquid cultures. Degradation of iron sulfides is performed using a modified Cr(2+) reduction method with reflux distillation. The basic steps of the method are: first, separation of FeS(amorph); second, elimination of interfering species of S such as colloidal sulfur (S(c) degrees ), thiosulphate (S(2)O(3)(2-)) and polysulfides (S(x)(2-)); third, separation of FeS(min); and fourth, separation of FeS(2min). The final product is H(2)S which is determined after trapping. The efficiency of recovery is 96-99% for FeS(amorph), 76-88% for FeS(min), and >97% for FeS(2min). This method has a high reproducibility if the experimental conditions are rigorously applied and only glass conduits are used. A well ventilated fume hood must be used because of the toxicity and volatility of several reagents and products. The advantage relative to previously described methods are better resolution for iron sulfide species and use of the same bottles for both incubation of cultures and acid degradation. The method can also be used for Fe/S stoichiometry with sub-sampling and Fe analysis.